This is an archive version of the document. To get the most up-to-date information, see the current version.

Erasing Tapes

In this article

    If you do not need contents stored on tape, you can erase tapes. Veeam Backup & Replication supports two options for erasing data:

    • Short erase (fast) — use this option to speed up the erase process. The short erase operation does not physically erase data written on the tape. It simply loads the tape to the drive and wipes the tape header. Note that short erase is not supported by some tape devices.
    • Long erase (slow) – use this option to clear all data written to tape. The long erase operation loads the tape to the drive, rewinds the tape and physically erases all data written to the tape.

    To erase tapes:

    1. Open the Tape Infrastructure view.
    2. Navigate to the list of tapes either under the Media Pools or under the Libraries > LibraryName node > Media > Online.
    3. Select tapes you want to erase and click Erase on the ribbon. Choose the type of erase and click OK.
      Alternatively, you can right-click selected tapes and choose Erase Tape. Next, choose how the tape should be erased and click OK.

    Erasing Tapes Important!

    You cannot erase protected tapes. To erase such tapes, you need to switch the protection off first.