This is an archive version of the document. To get the most up-to-date information, see the current version.System Requirements
The protected Veeam Agent computer must meet requirements listed in the table below.
|
The following system requirements apply to Veeam Agent for Microsoft Windows operating in the standalone mode. To learn about system requirements for Veeam Agent managed by Veeam Backup & Replication, see the System Requirements section in the Veeam Agent Management Guide. |
Specification | Requirement |
|---|---|
Hardware | CPU: x86-64 processor. Memory: 2 GB RAM or more. Memory consumption varies depending on number and size of processed disks. Disk Space: 200 MB for product installation. Network: 1 Mbps or faster. High latency and reasonably unstable WAN links are supported. System firmware: BIOS or UEFI. Drive encryption: Microsoft BitLocker (optional). Only Microsoft BitLocker is supported for drive encryption. Other drive encryption products are not supported. |
OS | Both 64-bit and 32-bit (where applicable) versions of the following operating systems are supported1:
1 Consider the following:
2 Veeam CBT driver is supported only if Microsoft Windows update KB3033929 is installed on the Veeam Agent computer. 3 Microsoft Windows 10 Education is supported starting from build 10586 and later. |
File System | Microsoft Windows FAT32/exFAT, NTFS, ReFS file systems are supported. The supported file system must reside on a volume that is 64 TB or smaller, because Veeam Agent uses the Microsoft Software Shadow Copy Provider to create a volume shadow copy during the backup. To learn more about the limitation, see this Microsoft article. |
Software | The following required 3rd party software is included in the setup program:
When installing the product, the setup program checks whether all prerequisite software is available on the target computer. If some of the required software components are missing, the missing software is installed automatically. If you plan to use Veeam Agent for Microsoft Windows with Veeam Backup & Replication, you must install Veeam Backup & Replication 10a on the Veeam backup server. |
Microsoft SQL Database | Microsoft SQL Server 2012 SP4 Express LocalDB Edition (installed with the product). |
Veeam Agent for Microsoft Windows works with only those hard drive types that are supported by the Microsoft Windows OS. Thus, Veeam Agent supports the 512 bytes and 4 KB sector hard drives only. Other hard drive types are not supported. To learn more, see this Microsoft article.
Backup Source
Veeam Agent for Microsoft Windows supports backup of data that resides in the following types of storage:
- Local (internal) storage of the protected computer.
- Direct attached storage (DAS), such as USB, eSATA or Firewire external drives (USB sticks and SD cards are not supported).
- Storage Area Network (SAN), such as iSCSI connected volumes.
Keep in mind that Veeam Agent cannot work with third-party volume managers installed on the protected computer. Such managers may not allow Veeam Agent to interact with necessary interfaces and services properly.
Backup Target
Backup can be performed to the following types of storage:
Disk-based storage
- Local (internal) storage of the protected computer (not recommended).
- Direct attached storage (DAS), such as USB, eSATA or Firewire external drives, and raw device mapping (RDM) volumes.
- Network Attached Storage (NAS) able to represent itself as SMB (CIFS) share.
- Storage Area Network (SAN), such as iSCSI connected volumes.
- Veeam Backup & Replication 10 or later backup repository.
Cloud storage
- Veeam Cloud Connect 10 or later cloud repository.
- Microsoft OneDrive storage (for Microsoft Windows 7 SP1, 8.1 and 10).
Network
Consider the following:
- Veeam Agent for Microsoft Windows should be able to establish a direct IP connection to the Veeam Backup & Replication server. Thus, Veeam Agent cannot work with Veeam Backup & Replication that is located behind the NAT gateway.
- Domain names of the Veeam Agent computer, Veeam Backup & Replication server and other servers in the Veeam backup infrastructure must be resolvable into IPv4 addresses.