Configuring SNMP Traps

If you use SNMP to monitor applications and devices in the managed infrastructure, you can configure Veeam ONE to report about triggered alarms by means of SNMP traps. When SNMP trap notifications are enabled, Veeam ONE acts as an agent. It generates trap messages when an alarm is triggered, and sends them to SNMP receivers. SNMP receivers can then forward the traps to a management application.

Veeam ONE sends SNMP traps with the following information:

  • Date and time the alarm was triggered
  • Name of the affected node
  • Old alarm status
  • New alarm status
  • Alarm name
  • Alarm summary

Veeam ONE supports SNMP versions 1, 2, and 3.

To configure SNMP traps, perform the following steps:

  1. Configure SNMP receivers and manager.
  2. Configure SNMP settings in Veeam ONE.
  3. Change alarm action settings to enable SNMP traps for the necessary alarms.
I want to report a typo

There is a misspelling right here:

 

I want to let the Veeam Documentation Team know about that.