Step 4. Specify Network Settings

In this article

    At the Network Settings step of the wizard, do the following:

    1. Select a VPC network and a subnet to which you want to connect worker instances created based on the new worker configuration.

    For a VPC network and a subnet to be displayed in the lists of available networks, they must be created for the region specified at step 3 in the Google Cloud Console as described in Google Cloud documentation.

     

    Important

    • A route whose destination IP address range is 0.0.0.0/0 and whose next hop is the default internet gateway must exist for the selected VPC network. To learn how to add and remove routes for a network, see Google Cloud documentation.
    • The selected subnet must have Private Google Access enabled. To learn how to enable Private Google Access for a subnet, see Google Cloud documentation.
    1. Select a firewall rule that will be used to control traffic between resources in the specified VPC network.

    For a firewall rule to be displayed in the list of available rules, it must be created in the Google Cloud Console as described in Google Cloud documentation.

     

    Important

    The selected firewall rule must allow HTTPS traffic to all VM instances on the specified VPC network. To learn how to create firewall rules that allow HTTPS connections, see Google Cloud documentation.

     

    Step 4. Specify Network Settings 

    I want to report a typo

    There is a misspelling right here:

     

    I want to let the Veeam Documentation Team know about that.