Help Center
Choose product document...
Veeam ONE 9.5
Monitor User Guide

Tabs View Settings

On the Tabs View Settings tab, you can enable the tabs view for Veeam ONE Monitor.

The tabs view is intended for screens and monitors in a network operations center (NOC). In this view, Veeam ONE automatically switches between its tabs (dashboards) with a certain time interval, displaying dashboards similarly to a slideshow. An administrator can view the whole picture without interacting with Veeam ONE, and can be sure not to miss critical situations in case they occur.

If the tabs view is enabled, Veeam ONE starts switching tabs only if there is no user input from a keyboard, mouse and so on. Once the user starts interacting with Veeam ONE Monitor, Veeam ONE Monitor stops switching tabs.

The tabs view is disabled by default. You can enable the tabs view and create rules according to which Veeam ONE must switch tabs.

There are two types of rules for the tabs view:

  • You can choose to switch tabs for an object that is selected in the navigation tree. This rule can be useful if you want to monitor the state of one critical object.
  • You can choose to switch specific tabs for a predefined scope of objects. This view can be useful if you want to monitor certain aspects of a critical infrastructure segment.

Switching Tabs for One Infrastructure Object

To enable the tabs view and create a rule that switches tabs for one infrastructure object:

  1. Open Veeam ONE Monitor.
  2. At the bottom of the inventory pane, click the necessary view — Infrastructure View, Business View, vCloud Director or Data Protection View.
  3. In the inventory pane, select the necessary infrastructure object.
  4. On the toolbar, click Options > Client Settings.

Alternatively, you can press [CTRL + O] on the keyboard.

  1. Open the Tabs View tab.
  2. In the Automatic tab switching rule section, select the Switch tabs for an object selected in the navigation tree option.
  3. In the Switch tabs every <time interval> section, specify a time interval at which tabs must be switched.

You can specify an interval in seconds, minutes and hours.

  1. Click OK.

Tabs View Settings

Switching Tabs for a Set of Infrastructure Objects

To enable the tabs view and create a rule that switches tabs for specific objects:

  1. Open Veeam ONE Monitor.
  2. On the toolbar, click Options > Client Settings.

Alternatively, you can press [CTRL + O] on the keyboard.

  1. Open the Tabs View tab.
  2. In the Automatic tab switching rule section, select the Switch tabs for these objects (recommended for NOC view) option.
  3. Choose objects to include in the tabs view scope, and specify tabs that must be displayed.
  1. Click Add and choose the type of infrastructure objects to add — Infrastructure View, Business View, vCloud Director View or Data Protection View.
  2. In the Select scope window, select check boxes next to objects you want to add to the scope and click OK.

To select an object together with its child objects, click it with the left mouse button. To select an object without its child objects, click it with the right mouse button.

If you select several objects of different types, Veeam ONE will create a new rule for each object type. For example, if you select a resource pool with VMs, Veeam ONE will add a rule for the resource pool, and a rule for VMs inside it.

  1. Select the added object in the list and click Edit Tabs.

Alternatively, you can click the All tabs link next to the added object.

  1. In the Select tabs window, select check boxes next to tabs that must be displayed for an object in the tabs view and click OK.
  2. Make sure that the State check box is selected for the newly added object. If the check box is cleared, the object will not be added to the tabs view scope.
  3. Repeat steps a-e for all objects you want to add to the scope.
  1. In the Switch tabs every <time interval> section, specify a time interval at which tabs must be switched.

You can specify an interval in seconds, minutes and hours.

  1. Select the Switch tabs for objects with active alarms only check box if Veeam ONE must switch tabs for infrastructure objects that have unresolved alarms — that is, only for objects that have potential problems and that may need your attention.
  2. Click OK.

Tabs View Settings

Veeam Large Logo

Deployment Guide

Deployment for Large-Scale Environments

Monitor User Guide

Reporter User Guide

Business View User Guide

Multi-Tenant Monitoring and Reporting

Working with Alarms

Veeam Backup & Replication Documentation

Veeam Endpoint Backup Documentation

Veeam Management Pack Documentation