New-VBRHvVirtualLabProxyAppliance

Short Description

Defines settings of proxy appliances.

Applies to

Product Edition: Standard, Enterprise, Enterprise Plus, Veeam Universal License

Syntax

New-VBRHvVirtualLabProxyAppliance -Server <CHost> [-Name <string>] [-Network <VBRHvServerNetworkInfo>] [-VLANID <int>] [-EnableIPv4Interface] [-ObtainIPAutomatically] [-IPAddress <ipaddress>] [-SubnetMask <string>] [-DefaultGateway <ipaddress>] [-ObtainDNSAutomatically] [-PreferredDNSServer <ipaddress>] [-AlternateDNSServer <ipaddress>] [-EnableIPv6Interface] [-ObtainIPv6AddressAutomatically] [-IPv6Address <ipaddress>] [-IPv6PrefixLength <int>] [-IPv6DefaultGateway <ipaddress>] [-ObtainIPv6DNSAutomatically] [-IPv6PreferredDNSServer <ipaddress>] [-IPv6AlternateDNSServer <ipaddress>] [-HTTPPort <int>] [-ProductionProxyIPAddress <ipaddress>] [-EnableInternetProxy]  [<CommonParameters>]

Detailed Description

This cmdlet defines settings of proxy appliances.

Parameters

Parameter

Description

Type

Required

Position

Accept Pipeline Input

Server

Specifies a Microsoft Hyper-V host. The cmdlet will deploy a proxy appliance on this host.

Note: The Microsoft Hyper-V host must be the same as the Microsoft Hyper-V host where the virtual lab is created.

This parameter must be the same as the Server parameter in the objects that are created by the following cmdlets:

Accepts the CHost object. To get this object, run the Get-VBRServer cmdlet.

True

Named

False

Name

Specifies a name of a proxy appliance. The cmdlet will deploy the proxy appliance with this name.

String

False

Named

False

Network

Specifies the production network. The cmdlet will connect a proxy appliance to the specified network.

Accepts the VBRHvNetworkInfo object. To get this object, run the Get-VBRHvServerNetworkInfo cmdlet.

False

Named

False

EnableIPv4Interface

Defines that IPv4 interface will be enabled.

SwitchParameter

False

Named

False

ObtainIPAutomatically

Defines that a proxy appliance will obtain an IPv4 address automatically.

If you provide this parameter, Veeam Backup & Replication will obtain an IP address for the proxy appliance automatically. Otherwise, you will need to set the IP address manually.

SwitchParameter

False

Named

False

IPAddress

Specifies an IPv4 address for a proxy appliance in the production network. The cmdlet will assign this IP address to a proxy appliance.

IPAddress

False

Named

False

SubnetMask

Specifies a subnet mask for a proxy appliance in the production network. The cmdlet will set up network settings of a proxy appliance with this subnet mask.

String

False

Named

False

DefaultGateway

Specifies an IPv4 address of a default gateway. The cmdlet will assign this IP address to a default gateway on a proxy appliance.

IPAddress

False

Named

False

ObtainDNSAutomatically

Defines that a proxy appliance will obtain DNS server settings automatically.

If you provide this parameter, Veeam Backup & Replication will obtain IPv4 DNS server settings for the proxy appliance automatically. Otherwise, you will need to set the DNS server settings manually.

SwitchParameter

False

Named

False

PreferredDNSServer

Specifies an IPv4 address of a preferred DNS server.

IPAddress

False

Named

False

AlternateDNSServer

Specifies an IPv4 address of an alternate DNS server.

IPAddress

False

Named

False

EnableIPv6Interface

Defines that IPv6 interface will be enabled.

SwitchParameter

False

Named

False

ObtainIPv6AddressAutomatically

Defines that a proxy appliance will obtain an IPv6 address automatically.

If you provide this parameter, Veeam Backup & Replication will obtain an IP address for the proxy appliance automatically. Otherwise, you will need to set the IP address manually.

SwitchParameter

False

Named

False

IPv6PreferredDNSServer

Specifies an IPv6 address of a preferred DNS server.

IPAddress

False

Named

False

IPv6AlternateDNSServer

Specifies an IPv6 address of an alternate DNS server.

IPAddress

False

Named

False

IPv6Address

Specifies an IPv6 address for a proxy appliance in the production network. The cmdlet will assign this IP address to a proxy appliance.

IPAddress

False

Named

False

IPv6DefaultGateway

Specifies an IPv6 address of a default gateway. The cmdlet will assign this IP address to a default gateway on a proxy appliance.

IPAddress

False

Named

False

IPv6PrefixLength

Specifies a prefix length for a proxy appliance in the production network. The cmdlet will set up network settings of a proxy appliance with this prefix length.

String

False

Named

False

ObtainIPv6DNSAutomatically

Defines that a proxy appliance will obtain IPv6 DNS server settings automatically.

If you provide this parameter, Veeam Backup & Replication will obtain DNS server settings for the proxy appliance automatically. Otherwise, you will need to set the DNS server settings manually.

SwitchParameter

False

Named

False

ProductionProxyIPAddress

Specifies an IP address or a fully qualified domain name of an Internet-facing proxy server that VMs from the isolated network must use to access the Internet.

IPAddress

False

Named

False

HTTPPort

Specifies the port number. VMs from the isolated network will use this port number to access the Internet.

Default: 8080.

Int32

False

Named

False

EnableInternetProxy

Defines that a proxy appliance will act as an internet proxy for VMs in the isolated network.

If you provide this parameter, a proxy appliance will act as an internet proxy for VMs in the isolated network. Otherwise, VMs from the isolated network will not have access to the Internet.

SwitchParameter

False

Named

False

VLANID

Specifies an ID of an isolated network. The cmdlet will create the isolated network with the specified ID.

Int32

False

Named

False

<CommonParameters>

This cmdlet supports Microsoft PowerShell common parameters. For more information on common parameters, see Microsoft Docs.

Output Object

The cmdlet returns the VBRHvVirtualLabProxyAppliance object that defines settings of proxy appliances that are added to the virtual lab.

Examples

New-VBRHvVirtualLabProxyApplianceExample 1. Defining Settings of Proxy Appliance with Automatic IP and DNS Setup

This example shows how to define settings of the Proxy_appliance_05 proxy appliance that is deployed with the automatic IP and DNS setup. The proxy appliance will be connected to the esx09.tech.local host.

 

$host = Get-VBRServer -Name "esx09.tech.local"

$network = Get-VBRHvServerNetworkInfo -Server $host

New-VBRHvVirtualLabProxyAppliance -Server $host -EnableIPv4Interface -ObtainIPAutomatically -ObtainDNSAutomatically -Name "Proxy_appliance_05" -Network $network[3]

Perform the following steps:

  1. Run the Get-VBRServer cmdlet. Specify the Name parameter value. Save the result to the $host variable.
  2. Run the Get-VBRHvServerNetworkInfo cmdlet. Set the $host variable as the Server parameter value. Save the result to the $network variable.
  3. Run the New-VBRHvVirtualLabProxyAppliance cmdlet. Specify the following settings:
  • Set the $host variable as the Server parameter value.
  • Provide the EnableIPv4Interface parameter.
  • Provide the ObtainIPAutomatically parameter.
  • Provide the ObtainDNSAutomatically parameter.
  • Specify the Name parameter value.
  • Set the $network[3] variable as the Network parameter value.

The Get-VBRHvServerNetworkInfo cmdlet will return an array of production networks. Mind the ordinal number of the necessary production network (An array starts with 0. In our example, it is the fourth production network in the array).

New-VBRHvVirtualLabProxyApplianceExample 2. Defining Settings of Proxy Appliance as Proxy

This example shows how to define settings of a proxy appliance that is deployed with the automatic IP and DNS and acts as an Internet proxy server. The proxy appliance will be deployed with the following settings:

  • The proxy appliance will be deployed on the esx07.tech.local host.
  • VMs from the isolated network will use the 172.17.1.2 IP address to access the Internet.
  • VMs from isolated network will use this the 8085 port number to access the Internet.

 

$host = Get-VBRServer -Name "esx07.tech.local"

New-VBRHvVirtualLabProxyAppliance -Server $host -EnableIPv4Interface -ObtainIPAutomatically -ObtainDNSAutomatically -HTTPPort 8085 -ProductionProxyIPAddress 172.17.1.2 -EnableInternetProxy

Perform the following steps:

  1. Run the Get-VBRServer cmdlet. Specify the Name parameter value. Save the result to the $host variable.
  2. Run the New-VBRHvVirtualLabProxyAppliance cmdlet. Specify the following settings:
  • Set the $host variable as the Server parameter value.
  • Provide the EnableIPv4Interface parameter.
  • Provide the ObtainIPAutomatically parameter.
  • Provide the ObtainDNSAutomatically parameter.
  • Specify the HTTPPort parameter value.
  • Specify the ProductionProxyIPAddress parameter value.
  • Provide the EnableInternetProxy parameter.