Set-HP4Storage

In this article

    Short Description

    Modifies settings of HPE StoreVirtual storage systems.

    Applies to

    Platform: VMware

    Product Edition: Standard, Enterprise, Enterprise Plus, Veeam Universal License

    Storage System: HPE StoreVirtual (LeftHand/P4000), HPE StoreVirtual VSA

    Syntax

    Set-HP4Storage -Host <CHpP4kGroup> [-DnsOrIpAddress <string>] [-Description <string>] [-UserName <string>] [-Password <string>] [-Credentials <CInternalCredentials>] [-Proxy <IProxy[]>] [-MountServer <CHost>] [-VolumeScanType {All | Exclude | Include}] [-IncludedVolume <CSanInfrastructureVolume[]>] [-ExcludedVolume <CSanInfrastructureVolume[]>] [-IncludedWildcard <string[]>] [-ExcludedWildcard <string[]>] [-AgentProxy <VBRNASProxyServer[]>] [-AgentVolumeScanType {All | Exclude | Include}] [-AgentIncludedVolume <CSanInfrastructureVolume[]>] [-AgentExcludedVolume <CSanInfrastructureVolume[]>] [-AgentIncludedWildcard <string[]>] [-AgentExcludedWildcard <string[]>] [-SkipRescan] [-Force] [-EnableProxyAutoSelection] [-ProtocolPolicy <VBRStorageProtocolPolicy>] [-AgentEnableProxyAutoSelection] [-AgentProtocolPolicy <VBRStorageProtocolPolicy>] [-EnableVMwareBackup] [-EnableAgentBackup]  [<CommonParameters>]

    Detailed Description

    This cmdlet modifies settings of HPE StoreVirtual storage systems. When you modify storage system settings, the cmdlet automatically rescans storage systems.

    To modify settings, enter the necessary parameters with new values. The parameters that you omit will remain unchanged.

    Set-HP4Storage Tip:

    You can specify the scope of volumes that you want to rescan with the VBRVolumeScanType parameter.

    Run Get-HP4InfrastructureVolume to get an array of volumes from HPE StoreVirtual storage systems.

    Alias

    Set-VBRHPStorage

    Parameters

    Parameter

    Description

    Type

    Required

    Position

    Accept
    Pipeline
    Input

    Host

    Specifies the storage you want to modify.

    CHpP4kGroup

    True

    Named

    True (ByValue,
    ByProperty
    Name)

    DnsOrIpAddress

    Specifies the string with a full DNS name or IP address of the storage.

    String

    False

    Named

    False

    Description

    Specifies the description of the storage.

    String

    False

    Named

    False

    UserName

    Specifies the user name that you want to use for authenticating with the storage.

    String

    False

    Named

    False

    Password

    Specifies the password you want to use for authenticating with the storage.

    String

    False

    Named

    False

    Credentials

    Specifies the credentials you want to use for authenticating with the storage.

    Accepts the CInternalCredentials object. To create this object, run the Get-VBRCredentials cmdlet.

    False

    Named

    False

    MountServer

    Specifies the mount server that you want to use to work with this storage.

    Accepts the CHost object. To create this object, run the Get-VBRServer cmdlet.

    False

    Named

    False

    EnableVMwareBackup

    Enables the VMware backup option.

    If you provide this parameter, you will be able to use storage snapshots to backup and restore VMware vSphere VMs hosted on storage systems.

    SwitchParameter

    False

    Named

    False

    EnableAgentBackup

    Enables the Veeam Agent backup option.

    If you provide this parameter, you will be able to integrate your storage systems with Veeam Agent for Microsoft Windows installed on computers in your infrastructure.

    SwitchParameter

    False

    Named

    False

    Proxy

    For the EnableVMwareBackup parameter.

    Specifies the array of proxies you want to use.

    String

    False

    Named

    False

    EnableProxyAutoSelection

    For the EnableVMwareBackup parameter.

    Indicates that Veeam Backup & Replication will use automatic proxy selection.

    SwitchParameter

    False

    Named

    False

    ProtocolPolicy

    For the EnableVMwareBackup parameter.

    Specifies the protocol policy for the storage.

    Accepts the VBRStorageProtocolPolicy object. To create this object, run the New-VBRStorageProtocolPolicy cmdlet.

    False

    Named

    False

    VolumeScanType

    For the EnableVMwareBackup parameter.

    Specifies the scope of volumes that you want to rescan.

    You can use the following options to rescan the volumes:

    • All - choose this option to scan all volumes that were added to your backup infrastructure with the initial scan.
    • Exclude - choose this option to exclude volumes from scan.
      NOTE: Veeam Backup & Replication will not show excluded volumes in the backup infrastructure after the rescan.
      Use the ExcludedVolume parameter to specify the excluded volumes.
    • Include - choose this option to scan only the specified storage volumes.
      Use the IncludedVolume parameter to specify the included volumes.

    VBRVolumeScanType

    False

    Named

    False

    IncludedVolume

    For the VolumeScanType parameter with the include option.

    Specifies an array of storage volumes that you want to rescan.

    NOTE: Veeam Backup & Replication will show only rescanned volumes in the backup infrastructure.

    Accepts the CSanInfrastructureVolume type.

    CSanInfrastructureVolume

    False

    Named

    False

    IncludedWildcard

    For the VolumeScanType parameter with the include option.

    Specifies an array of storage volumes with wildcard characters. Veeam Backup & Replication will rescan only those volumes which names are specified with these wildcard characters.

    String

    False

    Named

    False

    ExcludedVolume

    For the VolumeScanType parameter with the exclude option.

    Specifies an array of storage volumes that you do not want to rescan.

    NOTE: Veeam Backup & Replication will not show the excluded volumes in the backup infrastructure after the rescan.

    Accepts the CSanInfrastructureVolume type.

    CSanInfrastructureVolume

    False

    Named

    False

    ExcludedWildcard

    For the VolumeScanType parameter with the exclude option.

    Specifies an array of storage volumes with wildcard characters. Veeam Backup & Replication will not rescan the volumes which names are specified with these wildcard characters.

    String

    False

    Named

    False

    AgentProxy

    For the EnableAgentBackup parameter.

    Specifies an array of proxies you want to use with this storage.

    Accepts the VBRComputerFileProxyServer object. To create this object, run the Add-VBRComputerFileProxyServer cmdlet.

    False

    Named

    False

    AgentVolumeScanType

    For the EnableAgentBackup parameter.

    Specifies the scope of volumes that you want to rescan.

    You can use the following options to rescan the volumes:

    • All - choose this option to scan all volumes that were added to your backup infrastructure with the initial scan.
    • Exclude - choose this option to exclude volumes from scan.
      NOTE: Veeam Backup & Replication will not show excluded volumes in the backup infrastructure after the rescan.
      Use the ExcludedVolume parameter to specify the excluded volumes.
    • Include - choose this option to scan only the specified storage volumes.
      Use the IncludedVolume parameter to specify the included volumes.

    VBRVolumeScanType

    False

    Named

    False

    AgentIncludedVolume

    For the AgentVolumeScanType parameter with the include option.

    Specifies an array of storage volumes that you want to rescan.

    NOTE: Veeam Backup & Replication will show only rescanned volumes in the backup infrastructure.

    CSanInfrastructureVolume

    False

    Named

    False

    AgentExcludedVolume

    For the AgentVolumeScanType parameter with the exclude option.

    Specifies an array of storage volumes that you do not want to rescan.

    NOTE: Veeam Backup & Replication will not show the excluded volumes in the backup infrastructure after the rescan.

    CSanInfrastructureVolume

    False

    Named

    False

    AgentIncludedWildcard

    For the AgentVolumeScanType parameter with the include option.

    Specifies an array of storage volumes with wildcard characters. Veeam Backup & Replication will rescan only those volumes which names are specified with these wildcard characters.

    String

    False

    Named

    False

    AgentExcludedWildcard

    For the AgentVolumeScanType parameter with the exclude option.

    Specifies an array of storage volumes with wildcard characters. Veeam Backup & Replication will not rescan the volumes which names are specified with these wildcard characters.

    String

    False

    Named

    False

    AgentEnableProxyAutoSelection

    For the EnableAgentBackup parameter.

    Indicates that Veeam Backup & Replication will use automatic proxy selection.

    SwitchParameter

    False

    Named

    False

    AgentProtocolPolicy

    For the EnableAgentBackup parameter.

    Specifies the protocol policy for the storage.

    Accepts the VBRStorageProtocolPolicy object. To create this object, run the New-VBRStorageProtocolPolicy cmdlet.

    False

    Named

    False

    SkipRescan

    Indicates that the cmdlet will not start the storage rescan automatically after you add storage systems to the backup infrastructure.

    SwitchParameter

    False

    Named

    False

    Force

    Defines that the cmdlet will add an HP4 storage system without showing warnings in the PowerShell console.

    SwitchParameter

    False

    Named

    False

    <CommonParameters>

    This cmdlet supports Microsoft PowerShell common parameters. For more information on common parameters, see the About CommonParameters section of Microsoft Docs.

    Example 1

    This example shows how to enable the automatic proxy selection for the HPE StoreVirtual storage.

    1. Run Get-HP4Storage to get the storage that you want to modify. Save the result to the $storage variable.
    2. Run Set-HP4Storage with the $storage variable. Use EnableProxyAutoSelection parameter for the automatic proxy selection.

    $storage = Get-HP4Storage -Name ""HPE StoreVirtual VSA""

    Set-HP4Storage -Host $storage -EnableProxyAutoSelection

    Example 2

    This example shows how to exclude the specified HPE StoreVirtual storage volumes from the rescan session.

    1. Run Get-HP4Storage to get the storage system whose settings you want to modify. Save the result to the $storage variable.
    2. Run Get-HP4InfrastructureVolume to get volumes that you do not want to rescan. Save the result to the $volumes variable.
    3. Run Set-HP4Storage with the $storage and $volumes variables.

    $storage = Get-HP4Storage -Name ""HPE StoreVirtual VSA""

    $volumes = Get-HP4InfrastructureVolume -Name "Volume4", "Volume5", "Volume1"

    Set-HP4Storage -Host $storage -VolumeScanType Exclude -ExcludedVolume $volumes

    Example 3

    This example shows how to rescan all volumes added to an HPE StoreVirtual storage system.

    1. Run Get-HP4Storage to get the storage that you want to modify. Save the result to the $storage variable.
    2. Run Get-HP4InfrastructureVolume with the Host parameter to get volumes that you want to rescan. Save the result to the $volumes variable.
    3. Run Set-HP4Storage with the $storage and $volumes variables.

    $storage = Get-HP4Storage -Name ""HPE StoreVirtual VSA""

    $volumes = Get-HP4InfrastructureVolume -Storage $storage

    Set-HP4Storage -Host $storage -VolumeScanType Include -Included $volumes

    Related Commands

    Get-HP4Storage

    Get-VBRCredentials

    Get-VBRViProxy

    New-VBRStorageProtocolPolicy

    Get-HP4InfrastructureVolume