This is an archive version of the document. To get the most up-to-date information, see the current version.Start-VBRInstantRecovery
Short Description
Starts VMware Instant VM Recovery.
Applies to
Platform: VMware
Product Edition: Standard, Enterprise, Enterprise Plus, Veeam Universal License
Syntax
Start-VBRInstantRecovery [-RestorePoint] <COib> [-Server] <CHost> [[-ResourcePool] <CViResourcePoolItem>] [-VMName<string>] [-Datastore <CViDatastoreItem>] [-StoragePolicy <VBRViStoragePolicy>] [-Folder <CViFolderItem>][-PowerUp] [-NICsEnabled] [-Reason <string>] [-Credentials <CCredentials>] [-RunAsync] [-Force] [-SourceNetwork <VBRViNetworkInfo[]>] [-TargetNetwork <VBRViNetworkInfo[]>] [-EnableTagRestore] [-EnableAntivirusScan][-EnableEntireVolumeScan] [-VirusDetectionAction <VBRVirusDetectionAction> {DisableNetwork | AbortRecovery}] [-GenerateNewSystemUUID <SwitchParameter>][<CommonParameters>] |
Detailed Description
This cmdlet starts VM instant recovery. With this cmdlet, you can perform the following recover scenarios:
- Restore to original location
- Restore to original location with different settings
- Restore to another location
- Secure restore
Parameters
Parameter | Description | Required | Position | Accept | Accept |
|---|---|---|---|---|---|
RestorePoint | Specifies the restore point to which you want to recover the VM. | True | 1 | True (ByValue, | False |
VMName | Specifies a name you want to apply to the restored VM. By default, the original VM name is applied. | False | Named | False | False |
Server | For restore to another location. Specifies the target ESXi host where you want to locate the restored VM. Note: You must not specify a vCenter Server in this parameter. | True | 2 | False | False |
ResourcePool | For restore to another location. Specifies the resource pool where you want to locate the restored VM. | False | 3 | False | False |
Datastore | For restore to another location. Specifies the datastore to which you want to store the changes made to the VM during the Instant Recovery. Veeam Backup & Replication will redirect the redo logs to the selected datastore. | False | Named | False | False |
StoragePolicy | Specifies the VMware storage policy profile that must be applied to the restored virtual disks. Accepts VBRViStoragePolicy type. | False | Named | False | False |
Folder | For restore to another location. Specifies the folder where you want to locate the restored VM. | False | Named | False | False |
PowerUp | If set to True, the restored VM will be powered up immediately after the restore. Otherwise, you will have to power up the VM manually. | False | Named | False | False |
NICsEnabled | If set to True, the restored VM will be connected to the network. Otherwise the VM will have no network connections. | False | Named | False | False |
Reason | Specifies the reason for performing restore of the selected VM. The information you provide will be saved in the session history so that you can reference it later. | False | Named | False | False |
RunAsync | Indicates that the command returns immediately without waiting for the task to complete. | False | Named | False | False |
Force | Indicates that the cmdlet will perform VM restore even if the geographical location of the repository where VM backups reside and the target host location does not match. | False | Named | False | False |
EnableAntivirusScan | Indicates that the cmdlet will perform secure restore. Veeam Backup & Replication will trigger the antivirus software to scan selected VMs before the restore. | False | Named | False | False |
EnableEntireVolumeScan | For secure restore. Indicates that the antivirus will continue VMs scan after the first virus threat is found. Use this option if you want to get the report on all virus threats. | False | Named | False | False |
VirusDetectionAction | For secure restore. Specifies the secure restore action when the infection is detected.
| False | Named | False | False |
Credentials | Specifies the credentials you want to use for authenticating with the VM. | False | Named | False | False |
EnableTagRestore | Indicates that Veeam Backup & Replication will restore VMware tags. | False | Named | False | False |
SourceNetwork | For restore to another location. Specifies the source site network. Veeam Backup & Replication will map it to the target network. | False | Named | False | False |
TargetNetwork | For restore to another location. Specifies the target site network. Veeam Backup & Replication will map it with the source network. | False | Named | False | False |
GenerateNewSystemUUID | Defines that the cmdlet will generate a new system UUID for the restored machine. Note: Currently this parameter supports only the $false value: GenerateNewSystemUUID:$false. | False | Named | False | False |
<CommonParameters>
This cmdlet supports Microsoft PowerShell common parameters. For more information on common parameters, see the About CommonParameters section of Microsoft Docs.
Example 1
This example shows how to restore a VM to its original location and to the latest restore point.
You will need to perform the following steps:
- Run Get-VBRBackup to get the backup containing this VM. Save the result to the $backup variable.
- Get the most recent VM restore point:
- Run Get-VBRRestorePoint with the $backup variable to get VM restore points.
- Use the Sort-Object method to filter restore points by the CreationTime property.
- Save the result to the $restorepoint variable.
- Run Get-VBRServer to get the ESXi host where the original VM is registered. Save the result to the $server variable.
|
If you don't know the name of the source ESXi host, you can get it from the properties of the VM restore point. To do that, run the $restorepoint.AuxData.EsxName command. PowerShell will return the name of the source ESXi host. |
- Run Start-VBRInstantRecovery with the $restorepoint and $server variables.
$backup = Get-VBRBackup -Name "Support Backup" $restorepoint = Get-VBRRestorePoint -Backup $backup | Sort-Object –Property CreationTime –Descending | Select -First 1 $server = Get-VBRServer -Type ESXi -Name esx02.support.local Start-VBRInstantRecovery -RestorePoint $restorepoint -Server $server |
Example 2
This example shows how to restore the VM to another location with different settings. The job will run with the following settings:
- The VM is restored with name "MSExchange_Restored".
- The PowerUp parameter is used to enable the auto power up of the restored VM.
- The NICsEnabled parameter is used to connect the restored VM to the host network.
- The restore reason is "Data recovery".
- The RunAsync parameter is set to bring the process to the background.
You will need to preform the following steps:
- Run Get-VBRRestorePoint to get an array of the restore points for the selected VM. Save the result to the $restorepoint variable.
- Run Get-VBRServer to specify the target ESXi host. Save the result to the $server variable.
- Run Find-VBRViResourcePool to specify the resource pool. Save the result to the $pool variable.
- Run Find-VBRViDatastore to specify the datastore. Save the result to the $store variable.
- Run Find-VBRViFolder to specify the folder to locate the restored VM. Save the result to the $folder variable.
- Run Start-VBRInstantRecovery with the variables obtained in the previous steps.
$restorepoint = Get-VBRRestorePoint $server = Get-VBRServer -Name support.north.local $pool = Find-VBRViResourcePool -Name "ResourcePool_9" $store = Find-VBRViDatastore -Name "Datastore_5" $folder = Find-VBRViFolder -Name "VM_recovery" Start-VBRInstantRecovery -RestorePoint $restorepoint -VMName "MSExchange_Restored" -Server $server -ResourcePool $pool -Datastore $store -Folder $folder -PowerUp:$true -NICsEnabled:$true -Reason "Data recovery" -RunAsync |
Example 3
The example shows how to perform secure restore of the selected VM. The restore session will run with the following settings:
- The antivirus will continue VM scan after the first virus threat is found
- In case the threat is detected, Veeam Backup & Replication will cancel the restore session
- The RunAsync parameter is set to bring the process to the background
You must perform the following steps:
- Run Get-VBRRestorePoint to get an array of the restore points for the selected VM. Save the result to the $restorepoint variable.
- Run Start-VBRInstantRecovery with the $restorepoint variable. Set the AbortRecovery value of the VirusDetectionAction parameter to disable the recovery of the infected restore point.
$restorepoint = Get-VBRRestorePoint Start-VBRInstantRecovery -RestorePoint $restorepoint[1] -RunAsync -EnableAntivirusScan -EnableEntireVolumeScan -VirusDetectionAction AbortRecovery |
Related Commands