Configuring Network Interfaces

In the Veeam Host Management web UI, you can perform basic operations with network interfaces:

Apart from basic operations, in the Veeam Host Management TUI, you can also manage multiple network connections.

Managing IPv4/IPv6 Configuration

By default, Veeam appliances use one network interface that is configured automatically during the installation. You can change the default configuration in the Veeam Host Management web UI or TUI.

If you use the Veeam Host Management web UI, perform the following steps:

  1. In the main menu, click Network.
  2. To change the default configuration of the network interface, select the network adapter and click Edit.
  3. Configure required settings and click Save.

Configuring Network Interfaces 

If you use the Veeam Host Management TUI, perform the following steps:

  1. In the main menu, select Host configuration > Network.
  2. Select the network adapter and press [Enter].
  3. To change the default configuration of the network interface, select the Manual option.
  4. Configure required settings and press [Apply].

Configuring Network Interfaces 

If you want to configure advance settings for the default network interface, do the following:

  1. In the main menu, select Host configuration > Advanced network.
  2. Select the network adapter and press [Edit].
  3. Configure required settings and press [OK].

Configuring Network Interfaces 

Managing Network Adapters

You can enable and disable network adapters in the Veeam Host Management web UI or TUI.

If you use the Veeam Host Management web UI, perform the following steps:

  1. In the main menu, click Network.
  2. Select the network adapter and click Connect or Disconnect.

Note

If you disable the only network interface, the connection to the Veeam Host Management web UI will be lost. You can enable the interface again in the Veeam Host Management TUI.

Configuring Network Interfaces 

If you use the Veeam Host Management TUI, perform the following steps:

  1. In the main menu, select Host configuration > Network.
  2. Select the network adapter and press [Enter].
  3. Select Enable or Disable.

Configuring Network Interfaces 

Managing Multiple Network Connections

In the Veeam Host Management TUI, you can use the nmtui tool to add multiple network connections. To do this, perform the following steps:

  1. In the main menu, select Host configuration > Advanced network.
  2. Press [Add].
  3. Select the connection type and press [Create].
  4. Configure specific settings for the selected connection type and press [OK].

Configuring Network Interfaces 

Page updated 9/3/2025

Page content applies to build 13.0.0.4967