Configuring Updates

Veeam Backup & Replication on Linux supports the following update configurations:

Setting Up Global Update Configuration

The global update configuration is applied to all backup infrastructure components deployed from Veeam Software Appliance or Veeam Infrastructure Appliance and added as managed servers. You can set up this configuration in the Veeam Backup & Replication console or the Veeam Backup & Replication Web UI. Changes you make are applied to involved backup infrastructure components and synchronized automatically between the Web UI and the Veeam Backup & Replication console.

Note

Veeam Updater does not synchronize update configuration changes with outdated backup infrastructure components.

If you use the Veeam Backup & Replication console, perform the following steps:

  1. In the main menu, click Updates > Update Settings.
  2. On the General tab, configure the following settings:

Important

Consider the following:

  • If you select manual installation in the maintenance window, mandatory updates will be still automatically installed when the compliance deadline is reached.
  • If you miss the compliance deadline, updates will be installed even if you have running jobs. Backup or recovery operations performed by these jobs will fail.
  1. On the Internet Proxy tab, add the proxy server if you use one.
  2. Click OK.

Configuring Updates 

If you use the Veeam Backup & Replication Web UI, perform the following steps:

  1. At the top right corner, click Configuration. Then, click Update Settings.
  2. Configure the following settings:

Important

Consider the following:

  • If you select manual installation in the maintenance window, mandatory updates will be still automatically installed when the compliance deadline is reached.
  • If you miss the compliance deadline, updates will be installed even if you have running jobs. Backup or recovery operations performed by these jobs will fail.
  1. Click Apply.

Configuring Updates 

Setting Up Custom Update Configuration

The custom update configuration has a higher priority over global settings and is applied to a specific backup infrastructure component deployed from Veeam Software Appliance or Veeam Infrastructure Appliance and added as managed servers. You can set up this configuration in the VMware vSphere console or Veeam Updater.

To use the custom update configuration for the specific backup infrastructure component, perform the following steps:

  1. Log in to the Veeam Host Management console installed on this backup infrastructure component.
  2. In the main menu, click Updates. Alternatively, you can open Veeam Updater directly through the https://<hostname>/updater/updates link.
  3. On the Settings tab, set the Manual settings override toggle to On and configure custom update settings. For more information about settings, see Managing Global Update Configuration.
  4. Click Save.

Tip

If you want to use a custom update configuration for Veeam Backup & Replication itself, use the Veeam Host Management console or Veeam Updater installed on the backup server. In this case, global update configuration will be applied only to backup infrastructure components deployed from Veeam Infrastructure Appliance.

Configuring Updates 

Page updated 8/21/2025

Page content applies to build 13.0.0.4967